2023-11-30
Introduction To The Installation Method Of Hydraulic Cylinder
Seal the fuel tank to prevent contamination. Clean pipelines and tanks to avoid debris. Use lint-free cloth or special paper for cleaning.
Pipeline connections: Avoid any slack in pipeline connections to maintain system integrity.
Base rigidity: Ensure the base of the hydraulic cylinder has sufficient rigidity to prevent cylinder liner arching and piston rod bending under pressure.
Compare parameters: Before installation, compare the parameters on the hydraulic cylinder plate with the ordered parameters to ensure compatibility.
Alignment: Align the central axis of foot-mounted movable cylinders with the centerline of the load force to prevent lateral forces. Keep the cylinder's movement direction and the object's movement direction parallel on the slide rail, with a maximum flatness deviation of 0.05mm/m.
Seal cap screw: Install the sealing cap screw properly to allow smooth piston movement without obstruction or uneven weight. Avoid overtightening, which can increase resistance and cause damage, or undertightening, which can lead to oil leakage.
Radial sides: Do not fix both radial sides of the cylinder to allow for radial expansion and contraction due to hydraulic pressure and thermal deformation.
Guide sleeve gap: Ensure the gap between the guide sleeve and piston rod meets regulations.
Flatness and parallelism: Pay attention to the flatness and parallelism of the cylinder and slide rail, with an error within 0.1mm/total length. Adjust if necessary.
Disassembly precautions: When disassembling, avoid damaging threads on the piston rod and cylinder mouth. Do not beat the surface of the cylinder liner and piston. If damage occurs, use careful grinding with a fine oil stone.
Overall, these guidelines aim to ensure proper installation, maintenance, and longevity of hydraulic cylinders, promoting optimal performance and minimizing the risk of damage or malfunction.
