500-serien svejset hydraulisk cylinder

Ved at bruge disse materialer og komponenter af høj kvalitet sikrer CMG, at deres svejsede hydraulikcylindre i 500-serien er pålidelige, holdbare og i stand til at modstå kravene til 3000 PSI dobbeltvirkende hydraulikservice.

Model: 500-serien

Borestørrelse: 2 - 5

PSI: 3000

Request a Quote

Farver:

De svejste hydraulikcylindre fås i sort, grå og rød. Disse farvemuligheder giver visuel variation og kan potentielt tjene specifikke branding- eller identifikationsformål.

Monteringsværktøj:

Til samling af de svejste hydrauliske cylindre kræves stifter og clips. Disse komponenter spiller en afgørende rolle for at sikre de forskellige dele af cylinderen sammen og sikre korrekt funktionalitet.
Materialer til fremstilling500 Serie svejsede hydrauliske cylindre:
Nøgledele af de svejsede hydrauliske cylindre er lavet af råmaterialer af høj kvalitet, der understreger pålidelighed og ydeevne.

Topstykket og stemplet er begge lavet af højkvalitets duktilt jern. Duktilt jern er kendt for sin styrke, slagfasthed og holdbarhed.
Cylindercylinderen er et koldttrukket indvendigt slebet rør. Denne type rør giver en glat indvendig overflade, som hjælper med stemplets korrekte bevægelse.
Stempelstangen og cylinderens endedæksel er lavet af forkromet C45stål. Forkromning på stempelstangen forbedrer dens korrosionsbestandighed og forbedrer dens slidstyrkeegenskaber.
Stempeltætningerne på den svejste cylinder er lavet af polyurethan (PU) og designet med en nylon backup skive. PU-tætninger tilbyder god tætningsevne og modstandsdygtighed over for slid, mens nylon-backup-skiven giver ekstra støtte og stabilitet.
Cylinderhovedtætningen er en U-kop af polyurethan. U-koptætninger er almindeligt anvendt i hydrauliske applikationer på grund af deres effektive tætningsegenskaber.
Stangviskerne er lavet af PU. Stangviskere hjælper med at forhindre forurening i at trænge ind i cylinderen og beskytter stangoverfladen, hvilket bidrager til den hydrauliske cylinders levetid og ydeevne.

/" " " " " " " " " " NPT " /" " " " " " " " " " NPT " /" " " " " " " " " " NPT EN " /" " " " " " " " " " NPT " /" " " " " " " " " " NPT " /" " " " " " " " " " NPT " /" " "" " " " " " " " " " " " " " " " " " EN " /" Del nr.

Se Tegning1

Del nr.

Bore

Stempelstang

Tilbagetrukket

Slag

vægtykkelse

D (se tegning1)

Havn

Vægt (LBS)

52004

" 1-1 8

14.25

0.2

1.125

2.125

1.125

1.89

3/8

13.9

52006

" 1-1 8

16.25

0.2

1.125

2.125

1.125

1.89

3/8

15.2

52008

" 1-1 8

18.25

0.2

1.125

2.125

1.125

1.89

3/8

16.6

52008

" 1-1 8

20.25

0.2

1.125

2.125

1.125

1.89

3/8

17.2

52010

" 1-1 8

20.25

0.2

1.125

2.125

1.125

1.89

3/8

17.9

52012

" 1-1 8

22.25

0.2

1.125

2.125

1.125

1.89

3/8

19.3

52014

" 1-1 8

24.25

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

20.6

" 52016

/2"

1-1" 8

" 26.25

" 16

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

" 52018

/2"

1-1" 8

" 28.25

" 18

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

23.3

" 52020

/2"

1-1" 8

" 30.25

" 20

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

24.6

" 52024

/2"

1-1" 8

" 34.25

" 24

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

27.3

" 52028

/2"

1-1" 8

" 38.25

" 28

" 0.2

" 1

" 2

" 1.125

" 2.125

" 1.125

" 1

NPT 1.89

3/8

" 52030

/2"

1-1" 8

" 40.25

" 30

" 0.2

" 1

" 2

" 1.125

"2.125"

1.125"

1NPT

1.89

3/8

31.4

52032/

1-1 8"

42.25"

32"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

3/8

32.7

52034/

1-1 8"

44.25"

44"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

3/8

52036/

1-1 8"

46.25"

36"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

3/8

35.4

52504/

2.5

1-1 4"

14.25"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

1/2

17.8

52506/

2.5

1-1 4"

16.25"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

1/2

19.4

52508/

2.5

1-1 4"

18.25"

0.2"

1.125"

2.125"

1.125"

1NPT

1.89

1/2

" 21.1

52508"

2.5"

1-1" 4

" 20.25

" 8

" 0.2

" 1

" 2

" 1.125

NPT 2.125

1.125

1.89

1/2 Se Tegning

21.8

Bore

Stang

Tilbagetrukket vægtykkelse D LP LW LM LN EP HP Havn Vægt (LBS) " " " " /" " /" " /" " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT "" " /" " /" " /" " /" EN " /" " /" " " " " " " " " " " " " " " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT" NPT " NPT " NPT " NPT " NPT " NPT " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Se Tegning Slag LP LN Havn /"

Slag 1
													/
52510"	2.5"	1-1" 4	" 20.25	" 10	" 0.2	" 1	" 2	" 1.125	NPT 2.125	1.125	1	1.89	1/2	" 22.7
52512"	2.5"	1-1" 4	" 22.25	" 12	" 0.2	" 1	" 2	" 1.125	NPT 2.125	1.125	1	1.89	1/2	" 24.4
52514"	2.5"	1-1" 4	" 24.25	" 14	" 0.2	" 1	" 2	" 1.125	NPT 2.125	1.125	1	1.89	1/2	" 26
52516"	2.5"	1-1" 4	" 26.25	" 16	" 0.2	" 1	" 2	" 1.125	NPT2.125"	1.125/	1	1.89	1/2	27.7
" 52518	" 2.5	" 1-1 4	28.25	18	0.2	1	2	1.125	2.125"	1.125/	1	1.89	1/2	29.3
" 52520	" 2.5	" 1-1 4	30.25	20	0.2	1	2	1.125	2.125"	1.125/	1	1.89	1/2	31
" 52524	" 2.5	" 1-1 4	34.25	24	0.2	1	2	1.125	2.125"	1.125/	1	1.89	1/2	34.3
" 52528	" 2.5	" 1-1 4	38.25	28	0.2	1	2	1.125	2.125"	1.125/	1	1.89	1/2	37.6
" 52530	" 2.5	" 1-1 4	40.25	30	0.2	1	2	1.125	2.125"	1.125/	1	1.89	1/2	39.2
" 52532	" 2.5	" 1-1 4	42.25	32	0.2	1	2	1.125	2.125"	1.125/	" 1	" 1.89	" 1/2	" 40.9
52534"	2.5"	1-1" 4	" 44.25	" 34	NPT 0.2	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	" 42.5
52536"	2.5"	1-1" 4	" 46.25	" 36	NPT 0.2	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	" 44.2
53004"	3"	1-1" 2	" 14.25	" 4	NPT 0.25	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	" 23.5
53006"	3"	1-1" 2	" 16.25	" 6	NPT 0.25	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	" 25.9
53008"	3"	1-1" 2	" 18.25	" 8	NPT 0.25	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	" 28.4
53008"	3"	1-1" 2	" 20.25	" 8	NPT 0.25	1	2	1.125	2.125	" 1.125	" 1	" 1.89	" 1/2	"29.5"
53010	3	1-1 2"	20.25"	10NPT	0.25	1	2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	30.8"
53012	3	1-1 2"	22.25"	12NPT	0.25	1	2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	33.3"
53014	3	1-1 2"	24.25"	14NPT	0.25	1	2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	35.7"
53016	3	1-1 2"	26.25"	16NPT	0.25	1	EN 2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	38.1"
53016	3	1-1 2"	31.5"	16NPT	0.25	1	2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	40.8"
53018	3	1-1 2"	28.25"	18NPT	0.25	1	2	" 1.125	/2.125"	1.125"	1"	1.89"	1/2"	40.6"
53020	3	1-1 2"	30.25	20	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	43
" 53024	" 3	" 1-1 2	34.25	24	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	47.9
" 53028	" 3	" 1-1 2	38.25	28	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	52.8
" 53030	" 3	" 1-1 2	40.25	30	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	55.2
" 53032	" 3	" 1-1 2	42.25	32	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	57.7
" 53034	" 3	" 1-1 2	44.25	34	0.25	1	2"	1.125/	2.125	1.125	1	1.89	1/2	60.1
" 53036	" 3	" 1-1 2	46.25	" 36	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	62.6"
53504	3.5	1-3 4	14.25	" 4	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	29.4"
53506	3.5	1-3 4	16.25	" 6	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	32.4"
53508	3.5	1-3 4	EN 18.25	" 8	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	34.5"
53508	3.5	1-3 4	20.25	" 8	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	36.7"
53510	3.5	1-3 4	20.25	" 10	/0.25"	1"	2"	1.125"	2.125"	1.125"	1"	1.89"	1/2"	38.4"
53512	3.5	1-3 4	22.25	" 12	/0.25"	1"	2"	1.125"	2.125	1.125	1	1.89	1/2	41.4
NPT 53514	3.5	1-3 4	24.25"	14/	0.25	1	2	1.125	2.125	1.125	1	1.89	1/2	44.5
NPT 53516	3.5	1-3 4EN	26.25"	16/	0.25	1	2	1.125	2.125	1.125	1	1.89	1/2	47.5
NPT 53516	3.5	1-3 4	31.25"	16/	0.25	1	2	1.125	2.125	1.125	1	1.89	1/2	51
NPT 53518	3.5	1-3 4	28.25"	18/	0.25	1	2	1.125	2.125	1.125	1	1.89	1/2	50.5
NPT 53520	3.5	1-3 4	30.25	20	0.25 Stang	Tilbagetrukket 1	2 vægtykkelse	D 1.125	2.125 LW	LM 1.125	1 EP	HP 1.89	1/2 Vægt (LBS)	53.5

" " " " " " " " " " " " " " " " NPT " " " " " " " " "" " " " " " " " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT " " " " " " " " NPT "/" " " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " " " " NPT " " " " " " " "/" /" CMG er en berømt producent af svejset hydraulisk cylinder i Kina. Vi har haft overstået

" 1
		"		"			"			NPT
/1-3" 4	" 34.25	" 24	" 0.25	" 1	" 2	" 1.125	" 2.125	" 1.125	" 1.125	" 1.89	NPT 1/2	59.5
/1-3" 4	" 38.25	" 28	" 0.25	" 1	" 2	" 1.125	" 2.125	" 1.125	" 1.125	" 1.89	NPT 1/2	65.5
/1-3" 4	" 40.25	" 30	" 0.25	" 1	" 2	" 1.125	" 2.125	" 1.125	" 1.125	" 1.89	NPT 1/2	68.6
/1-3" 4	" 42.25	" 32	" 0.25	" 1	" 2	" 1.125	" 2.125	" 1.125	" 1.125	" 1.89	NPT 1/2	71.6
/1-3" 4	" 44.25	" 34	" 0.25	" 1	" 2	" 1.125	" 2.125	" 1.125	" 1.125	" 1.89	NPT 1/2	74.6
" 1-3 4	46.25	36	0.25	1	2	1.125	2.125	1.125	1.125	1.89	1/2	77.6
2	14.25	4	0.25	1.25	2	1.25	2	" 1.125	" 1.125	NPT 1.89	1/2	35.4
" 2	" 16.25	" 6	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	39.1
" 2	" 18.25	" 8	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	42.7
" 2	" 20.25	" 8	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	44.5
" 2	" 20.25	" 10	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	46.4
" 2	" 22.25	" 12	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	5.1
" 2	" 24.25	" 14	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT 1.89	1/2	53.7
" 2	" 26.25	" 16	" 0.25	" 1.25	" 2	" 1.25	" 2	" 1.125	" 1.125	NPT1.89"	1/2"	57.4"
2	31.25	16	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	62.5"
2	28.25	18	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	61.1"
2	30.25	20	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	64.8"
2	34.25	24	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	72.1"
2	38.25	28	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	79.5"
2	40.25	30	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	83.1"
2	42.5	32	0.25	1.25	2	1.25	2	1.125	1.125	1.89"	1/2"	86.8"
" 2	" 44.25	" 34	" 0.25	" 1.25	" 2	" 1.25	NPT 2	1.125	1.125	" 1.89	" 1/2	" 90.5
2"	46.25"	36"	0.25"	1.25"	2"	1.25"	2NPT	1.125	1.125	/1.89"	1/2"	94.2"
2-1 2"	16.25"	4"	0.25"	1.25"	2"	1.25"	2NPT	1.25	1.5	/2.5"	1/2"	64"
2-1 2"	18.25"	6"	0.25"	1.25"	2"	1.25"	2NPT	1.25	1.5	/2.5"	1/2"	69.1"
2-1 2"	20.25"	8"	0.25"	1.25"	2"	1.25"	2NPT	1.25	1.5	/2.5"	1/2"	74.2"
2-1 2"	22.25"	10"	0.25"	1.25"	2"	1.25"	2NPT	1.25	1.5	/2.5"	1/2"	79.3"
2-1 2"	24.25"	12"	0.25"	1.25"	2"	1.25"	2NPT	1.25	1.5	/2.5"	1/2"	84.4"
2-1 2"	26.25"	14	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	89.5
" 2-1 2	28.25	16	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	94.6
" 2-1 2	31.25	16	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	102.1
" 2-1 2	30.25	18	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	99.7
" 2-1 2	32.25	20	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	104.9
" 2-1 2	36.25	24	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	115.1
" 2-1 2	40.25	28	0.25	1.25	2	1.25	2	1.25	1.5/	2.5	1/2	125.3
" 2-1 2	42.25	30	0.25	" 1.25	" 2	NPT 1.25	2	1.25	" 1.5	" 2.5	" 1/2	" 130.4
2-1" 2	" 44.25	" 32	" 0.25	" 1.25	" 2	NPT 1.25	2	1.25	" 1.5	" 2.5	" 1/2	" 135.5
2-1" 2	" 46.25	" 34	" 0.25	" 1.25	" 2	NPT 1.25	2	1.25	års produktions- og markedsføringserfaring inden for hydraulisk udstyr. Vores primære produkter falder inden for svejsede hydrauliske cylindre, trækstangshydraulikcylindre, ramhydraulikcylindre og teleskopiske hydrauliske cylindre. Alle vores produkter er lavet i nøje overensstemmelse med ISO1.5 internationale kvalitetsstyringssystem standard. Hvis du har behov for hydrauliske produkter, bedes du tage telefonen og ringe til os med det samme.	2.5	1/2	140.6
2-12	48.25	36	0.25	1.25	2	1.25	2	1.25	1.5	2.5	1/2	154.7

209001:2000

Øget produktivitet

Skiving Roller Polering

Accuracy Inspection

Svejsning

Spray Coating

Rengøring

Montering og test

CNC bearbejdning

Get in Touch

Inquire Form